| 3 Shaper system |
|
| Tenoning Shaper with Panel Trimming |
|
| (with Carbide Insert Rail Cutter) |
|
| Item# |
Description |
| SH1316 |
Shaper 3HP |
| |
(1-1/4" Spindle 20" x 28" Top) |
| SH1X38 |
Table Groove |
| BY1LHRE-1-1/4" |
Bore LH Rail Head with tips (3) |
| AJ1201RW |
Air Tenon Jig (Right) |
| FE53 |
Split Tenon Fence (for under Trim. top) |
| WD4246 |
Warning disc 4-3/4" od x 1-1/4" id |
| DS442 |
Dust Shield for Air Tenon & Panel Trimming |
| WR620 |
Top Wrench |
| WR6180 |
Bottom Wrench |
| Panel Trimming |
|
| After tenoning, flip down the FE365 table to trim your panels without changing cutters or spindle height |
| FE365 |
Hinged Table Top for Trimmer |
| NC8389 |
Trimming Cutter 2W Carbide Sq. Edge |
| DC21621 |
Dead Collar for 4-3/4"SC 2-1/2"ODx2-5/8" |
| JM310 |
Crown Panel Jig |
| PA417 |
Hardwood Patterns 1-1/2" Crown - Panel |
WD4246
|
Warning disc 4-3/4"ODx1-1/4"ID
|
| Stile & Rail Shaper |
|
| Straight & Crown Setup |
|
| Item# |
Description |
| SH1316 |
Shaper 3HP |
| |
(1-1/4" Spindle, 20"x28" top) |
| BY1LHSE-1-1/4" Bore Stile Head with Quarter Rd. Stile Insert Tips (3) |
|
| DC31612 |
-for-4-3/4"SC - Dead Collar 3-1/2"ODx1-1/2"Tall |
| FE360H |
Sticker Plate Setup with Hold Down |
| PA427 |
Hardwood Patterns 1-1/2" Crown - Rail |
| JM330 |
Crown Rail Jig |
| PF721W |
Variable Speed Double Bond Belt Feeder |
| DS445 |
Dust shield for Curved & Straight Rail |
WD4246
|
Warning disc 4-3/4" ODx1-1/4"ID
|
| Panel Raising Shaper Straight & Crown Setup |
|
| Item# |
Description |
| SH1516 |
Shaper 5HP |
| |
(1-1/4" Spindle, 20"x28" top) |
| BYP201LHS |
Raised Panel Cutter Head |
| 6"ODx1-1/4"ID w/tips |
|
| BYPRBLH |
Partial Under Raiser Cutter Head with tips(3) |
| FE275028 |
Partial Offset Raised Panel Guides 2-3/4" |
| BB2246 |
Ball Bearing Rub Collar |
| HD3100 |
Raised Panel Hold Down |
| PF721W |
Weaver Double Bond Belt Power Feeder |
| DS465 |
Raised Panel Dust shield |
| WD6086 |
Warning disc 6-1/4"ODx1-1/4"ID |
