weaver crown raised panel and rail jigs

weavers home page
Carbide Tipped Saw Blade Special!!
Contact , Catalog Index

Rail & Panel
Jigs & Patterns - Manual

... return to prices
... return to jigs, fixtures and accessories page

MANUAL CROWN RAIL & PANEL JIGS & PATTERNS:		Manual Crown Panel Jigs Manual Crown Rail Jigs -Custom Jig -Larger Opening -Coping Hold Down - Tenon -Drawer Ends Hold Down - edge detail Weavers Rail and Panel Patterns - Hardwood Patterns 1. Tenoning the ends of the top crown rail before shaping the crown rail will reduce end grain chip-out. (however for the point to point or eyebrow arch (our oval PA415, PA425) Tenon the "left" end of the top crown rail, then shape the rail (crown sticking) then tenon the "right" end.) 2. Use jig #JM330 to center rail to pattern, then trace pattern shape on rail. Place crown rail material on the bottom and crown rail pattern in notch on top. After tracing remove rail from jig and band saw rail approximately. 3. Set shaper up with sticking (female) part of the door cutter set, ball bearing rub collar and warning disc. 1/8" larger than pattern detail. 4. Place top rail in jig #JM330 and the appropriate rail pattern in jig. By turning center knob, jig will self center top rail to the pattern. Tighten center lock nut and toggle clamps. 5. Use the left front corner of the pattern to stop the bearing before shaping. The cutters will size top rail to pattern and detail the edge of the rail. Shapermaster^TM Air Rail & Panel Jigs Shapermaster Air Rail and Panel Jigs Weavers Rail and Panel Patterns - Plexiglass Patterns TENONING JIGS SHAPER CUTTERS
Jig for arched-top, cathedral and many other patterns or templates of cabinet doors.
Hardwood Panel Patterns . Manual Panel Jig JM310 Press start button for Crown Panel Jig video.	Hardwood Rail Patterns Manual Rail Jig JM330 Press start button for Crown Rail Jig video.